SKF 6012/C4 Single Row Ball Bearings

N:11,5mm; T max.:200 °C; J:63.5 mm; d1:27.2 mm; T min.:-20 °C; e:19 mm; Weight:0.44 kg; Recommended tightening torque for set screw:5.5 Nm; A1:10 mm; d:12 mm;

Shaft Attachment (2):Set Screw; Ball Material:440 STAINLESS STEEL; Flinger Material:Stainless Steel; Bearing Family:Setscrew Ball Bearin; d:1.9375 in; Bearing Duty:Normal Duty; Bearing Bore Shape:Round; Self Aligning:Self Centering; Base to Center Height:Not Applicable; Ball Bearing Housing Series:2

Flinger Material:Steel; d:0.9375 in; Seal Type:Single Lip; Ball Grade:Class 10; Grease Type:Unirex N2; Shaft Attachment (2):Eccentric Collar; Flinger Type:Rubberized; Brand:Baldor-Dodge; Bearing Insert Material:Steel; Ball Bearing Housing Series:205 Series;

C:66 kN; T min.:-20 °C; H3:160; L:220 mm; B1:92.1 mm; T max.:100 °C; Designation of housing:FC215-; N:19mm; Designation of bearing:EX215-48G2L3; C0:49.5 kN;

Designation of housing:FL212-; s1:32.55 mm; N:23mm; J:202 mm; A2:68.7 mm; L:140 mm; d:60 mm; A1:18 mm; A:48 mm; H:250 mm;

L:162 mm; A:48.5 mm; C:43.55 kN; A1:15 mm; Designation of housing:FE211N-; Designation of closed end cover:SCC211; N:18mm; T max.:200 °C; Recommended tightening torque for set screw:8 Nm; G:R1/8";

Characteristic outer ring frequency, BPF0:10.23 Hz; d:50.8 mm; Y2:1.49; D:97.63 mm; r1a max:0.8 mm; ra max:3.5 mm; B:24.61 mm; Nlim (grease):3,700 rpm; Characteristic inner ring frequency, BPFI:12.77 Hz; Max operating temperature, Tmax:120 °C;

C1:5.8 mm; r:1.1; B1:51.1 mm; S:18.8 mm; B2:17.5 mm; d:31.75 mm; C:20 mm; B:37.6 mm; Weight:0.66 kg; SW:3.97 mm;

e:44 mm; T max.:200 °C; N:35mm; A1:30 mm; s1:80.15 mm; d:88.9 mm; B:87.3 mm; Recommended tightening torque for set screw:65.2 Nm; S:43.6 mm; Designation of housing:F318-;

Expansion Type:Non-Expansion; UPC:782475115761; End Cap Groove:No; Retainer Material:Nylon; Grease Type:Unirex N2; Anti-Rotation Pin:Yes; Shaft Attachment (2):Set Screw; Ball Material:Steel; Flinger Type:Rubberized; Brand:Baldor-Dodge;

G:R1/8"; L1:29 mm; L:120 mm; A1:32 mm; d:44.45 mm; T max.:200 °C; Recommended tightening torque for set screw:8 Nm; T min.:-20 °C; Z:70.3 mm; H1:14 mm;

N:19mm; C:35.1 kN; H:197 mm; Designation of bearing:UC210-30G2T04; Designation of housing:FL210N-; A2:54.6 mm; J:157 mm; B:51.6 mm; e:22 mm; C0:23.2 kN;

s1:11 mm; Designation of bearing:US202G2T04; A2:31 mm; d:15 mm; Weight:0.38 kg; S:6 mm; N:12mm; B:22 mm; A1:11 mm; C0:4.78 kN;

L:185 mm; A:42 mm; A1:13 mm; J:150 mm; B:55.6 mm; s1:27.8 mm; A2:46.4 mm; Dz:110 mm; A4:30 mm; H3:125;

Recommended tightening torque for set screw:16.8 Nm; A1:20 mm; B1:85.7 mm; J:210 mm; e:30 mm; T min.:-20 °C; S:34.1 mm; A:50 mm; N:23mm; Designation of housing:FL213-;